How To Make Quark Cheese
User Reviews
5.0
207 reviews
Excellent
-
Prep Time
20 mins
-
Cook Time
20 mins
-
Additional Time
1 d
-
Total Time
1 d 35 mins
-
Course
Condiments
-
Cuisine
German, International
How To Make Quark Cheese
Report
Quark is a wonderfully creamy, spreadable soft cheese that deliciously versatile in both sweet and savory dishes.
Share:
Ingredients
- 2 gallons whole milk (or half whole/half 2%) (whole milk will produce the creamiest, most flavorful result. Raw milk, which is what I use, will produce the very best results.)
- 1/4 teaspoon mesophilic culture
- 1/2 teaspoon liquid calcium chloride (omit if using raw milk)
- 1/2 teaspoon liquid rennet
- Additional equipment needed:
- stainless steel skimmer
- cheesecloth
- Thermometer (you can use a dairy thermometer or a regular instant read digital thermometer)
Add to Shopping List
Instructions
- Put the milk in a large sterilized pot over medium heat. Slowly heat it to 77 F. Don't try and speed up this process or the milk will not set properly. Stir the milk gently with a sterilized stainless steel spoon to prevent scorching. Remove the pot from the heat.
- Sprinkle the mesophilic culture evenly over the surface of the milk and let it sit for 5 minutes to rehydrate. Use a sterilized stainless steel skimmer, moving it in a gentle up-and-down motion to draw down and mix in the culture, avoiding breaking the surface of the milk. Stir the calcium chloride in 1/2 cup of cool, non-chlorinated water. Give the milk a gentle stir and while it's swirling, add the diluted calcium chloride to the milk. Immediately stir the milk with the skimmer using the same up-and-down motion. Stir the rennet in 1/2 cup of cool, non-chlorinated water and repeat the process of using the skimmer with the up-and-down motion. Make sure the calcium chloride and rennet are thoroughly mixed throughout the milk, otherwise the milk will not set properly.Cover the pot and let it sit in a draft-free location at room temperature for 24 hours (wrap the pot in a large towel if needed).After 24 hours check the milk. Tip the pot carefully to drain off the whey on the surface.
- If the milk is properly set it will have pulled away from the sides. Use a long, sterilized knife to check for a clean break in the thickened milk (see pics in blog post). If you can cut through it and get a clean break the milk is properly set. If it isn't, let it continue to sit and check again after 30 minutes. Repeat if needed. Use a long, sterilized knife to cut 2-inch-wide strips from top to bottom through the curd. Then follow the same process to cut 2-inch strips horizontally from side to side. Now that you've used a long knife to cut the curd vertically, next use the skimmer to cut the curd horizontally into cubes.
- Place the curds in a colander lined with cheesecloth. Depending on the size of your colander you may need to work in batches. Let the curds drain for about 4 hours (it may be less depending on the mesh size of your cheesecloth). Let the curds drain until you get a thick, spreadable consistency. Transfer the finished quark to a bowl, give it several good stirs to break up any lumps, cover and refrigerate until ready to use. It will keep in the fridge for up to 2 weeks. Yield: This will vary according to what type of milk you use and how long you let it drain. Yield will be approximately 4 pounds.
- For an even creamier consistency you can make what the Germans call Sahnequark, or "cream quark", by stirring in a little heavy cream.
Genuine Reviews
User Reviews
Overall Rating
5.0
207 reviews
Excellent
Other Recipes
You'll Also Love
